Corrosion resistance of resin sheet material

? At room temperature epoxy resin, polyesters materials anti-corrosion for Si can forms simple
  Medium Density% Corrosion resistance Medium Density% Corrosion resistance Medium Density% Corrosion resistance
Ring Oxygen Tree Lipoprotein Sulfuric acid 60 Able to bear Nitric acid 10 Able to bear Acetic acid 10 Able to bear
Hydrochloric acid 31 Able to bear Chromium acid 10 Able to bear Phosphoric acid 80 Able to bear
Hydrogen Fluorine acid 5 Able to bear Hydrogen oxidizes potassium   Able to bear Benzene   Able to bear
Fluorine sodium hydrogen 50 Able to bear Sodium chloric acid once 50 Able to bear Toluene   Able to bear
Inferior sulfuric acid   Able to bear Chlorine ammonium 5 Able to bear Ethanol   Able to bear
Benzene sulphur acid   Able to bear Ammonia water   Able to bear Three chlorine ethylene   Not able to bear
Sulphur acid of chlorine   Not able to bear Propanone   Not able to bear Second ketone of ring 30 Not able to bear
Gather Lipoprotein Tree Lipoprotein Sulfuric acid 50 Able to bear Nitric acid 5 Able to bear Acetic acid 50 Able to bear
Hydrochloric acid 20 Able to bear Chromium acid 5 Able to bear Phosphoric acid   Able to bear
Fluorine sodium hydrogen 20 Able to bear Hydrogen oxidizes potassium   Able to bear Benzene   Not able to bear
Inferior sulfuric acid 10 Able to bear Sodium chloric acid once 10 Able to bear Toluene   Not able to bear
Cumbersome sulphur acid 50 Able to bear Chlorine ammonium 5 Able to bear Ethanol   Able to bear
Sulphur acid of chlorine   Able to bear Ammonia water   Not able to bear Three Fluorine ethylene   Not able to bear
    Not able to bear Third copper     Second copper of ring   Not able to bear
?At room temperature epoxy resin, it is anti-corrosion for Si in polyesters materials can forms simple
Project Index Project Index
Densityg/cm

Clay
Mortar
Glass fibre reinforced plastic

Oxygen of ring
1.4-2.0
2.2-2.4
1.6-1.8

Polyester
1.6-1.8
1.8-2.0
2.2-2.4 
Intensity mpa of bonding mpa
Not less than
Clay and granite
Clay and cement
Mortar or concrete
Clay and steel products
Oxygen of ring
2.5
2.0
1
Polyester
2.5
1.5
2
Compression strength mpa
Not less than
Clay
Mortar
80
70
80
70
the shrinking rate%not more than Clay
Mortar
0.2
0.2
0.9
0.7
Intensity mpa of bonding mpa

Not less than
Clay
Mortar Glass
fibre reinforced plastic
9
7
100
9
7
100
the absorbing water rate%not more than Glass fibre reinforced plastic of clay
Mortar
0.2
0.5
0.2
0.5
The intensity mpa of bonding is not less than Clay and acidproof brick 3 2.5 Use temperature not to greater than Sand thick liquid glass fibre reinforced plastic of clay 80 60
? Simple form of corrosion-resistant performance of vinyl resin
Density Use temperature at most
Hydrochloric acid Less than 18%
20%
37%
100is taken a photograph of person degree
100is taken a photograph of person degree
65is taken a photograph of person degree
Sulfuric acid Less than 50%
60-70%
75%
100is taken a photograph of person degree
80is taken a photograph of person degree
50is taken a photograph of person degree
Nitric acid Less than 5%
15%
25%
35%
80is taken a photograph of person degree
65is taken a photograph of person degree
50is taken a photograph of person degree
40is taken a photograph of person degree
Hydrogen is oxidized and received 25% 70is taken a photograph of person degree
Propanone 10% 80is taken a photograph of person degree
邵阳塔北路多少钱一次 Warning: include_once(bottom.php): failed to open stream: No such file or directory in /web/websys/jianheng/en/newsd.php on line 86 Warning: include_once(): Failed opening 'bottom.php' for inclusion (include_path='.:/usr/share/pear:/usr/share/php') in /web/websys/jianheng/en/newsd.php on line 86